### menu prepare ###
[menu __main]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Prepare

[menu __main __bed_tramming]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Bed tramming

[menu __main __bed_tramming __preheat]
type: command 
enable: {not printer.idle_timeout.state == "Printing"}
name: Preheat all 
gcode:
    M140 S70
    M104 S180
         
[menu __main __bed_tramming __home] 
type: command 
name: Home All 
gcode: G28 
enable: {not printer.idle_timeout.state == "Printing"}

[menu __main __bed_tramming __start] 
type: command 
name: Start 
enable: {not printer.idle_timeout.state == "Printing"}
gcode: BED_SCREWS_ADJUST

[menu __main __bed_tramming __accept] 
type: command 
name: Accept 
enable: {not printer.idle_timeout.state == "Printing"}
gcode: accept

[menu __main __bed_tramming __adjust] 
type: command 
name: Adjusted 
enable: {not printer.idle_timeout.state == "Printing"}
gcode: adjusted

[menu __main __bed_tramming __abort_screws] 
type: command 
name: Abort 
enable: {not printer.idle_timeout.state == "Printing"}
gcode: 
    abort
    G28