# Park at center of build volume
[gcode_macro PARK_CENTER]
gcode:
    {% if "xyz" not in printer.toolhead.homed_axes %}
        G28 X Y                         ; home if not already homed
    {% endif %}
    SAVE_GCODE_STATE NAME=PARK_CENTER
    G90                               ; absolute positioning
    G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} F6000    
    RESTORE_GCODE_STATE NAME=PARK_CENTER

# Manual bed tramming, simular to the Marlin menu but works only in a browser and not on the HDMI7.
[gcode_macro Bed_Tramming]
gcode:
    {% set BED_TEMP = params.BED_TEMP|default(80)|float %}
    {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(180)|float %}
    M140 S{BED_TEMP}
    M104 S{EXTRUDER_TEMP}
    G28
    M190 S{BED_TEMP}
    M109 S{EXTRUDER_TEMP}
    BED_SCREWS_ADJUST

[bed_screws]
horizontal_move_z: 5
screw1: 35, 35
screw2: 175, 175
screw3: 175, 35
screw4: 35, 175